5/31/2023 0 Comments Phasing on a kick drum![]() Phase cancellation can also occur by simply wiring speakers incorrectly, inadvertently reversing the polarity of one channel. For example, a bass track recorded direct (DI) can be too clean sounding, so putting a mic on the bass amp cabinet and mixing the two sounds can give the extra “oomph” it needs - but it can also introduce phase problems.Įven certain delay settings, including pre-delays within a reverb patch, can create a delay of your original signal that ends up being out of phase There are plenty of other “gotchas” that can introduce phase problems into your recordings. It's also why a lot of “old school” recording engineers wax nostalgic about the days when they recorded a kit with only two or three mics! That’s why many microphones, as well as mic preamps and consoles, offer a phase flip switch. Now factor in the hi-hat mic, a pair of overheads, at least one kick drum mic and one on every tom, not to mention the relationship to ambient mics, and you’ve got a sonic soup that’s ripe for phase problems. Since the top and bottom heads of the drum are usually moving in directly opposing motion (when the top drum head is hit, it moves inward, causing the bottom head to move outward), the two mics will record signals that are directly out of phase. Consider even a single snare drum, miked from above and beneath. In modern music recording, that usually points to the drum kit. Again, the more microphones used in a recording, the more potential for phase problems.
0 Comments
Leave a Reply. |